Home » Products » Transmission Line Hardware

Overhead Line Equipment

Having spent so long in this field as a leading manufacturer of Overhead Line Equipment (Transmission Line Hardware), we understand that durability and safety are must criteria for the success of a power transmission system in the longer run. At every single point in a transmission grid — which, by the way, is the field of energy networks itself — hardware is critical to maintaining the migrant integrity and safety of the network. In this overhead line equipment guide, we will discuss some Key Components — Connection Fittings, Insulation Fittings, Protection Fittings, Suspension Clamps, Tension Clamps, etc.

Electrical Overhead Line Equipment

They work to ensure the efficient, safe and reliable operation of electricity transmission systems. - Ensuring every single connection fittings we make to get electrical connections & tension clamps to keep a line stable – every product is manufactured for precision & durability.

  • Connection Fittings: The most important types of overhead equipment fittings. Common types of technical fittings used in connections between conductors, connectors and components.

  • Insulation Fittings: Prevent electrical failures by providing important insulation.

  • Protection Fittings: Ensure protection of the line and circuitry against electrical surges, lightning, and other environmental threats

  • Suspension Clamps: These are the clamps used for the suspension of conductors.

  • Tension Clamps: Keep that transmission line tight and under tension.

Using quality overhead line equipments will enhance the efficiency subsequent life of your power transmission system, thus significantly reducing downtimes, ensuring a stable power supply.

Transmission Line Hardware

  • Suspension Clamp XGF-GH
    1. Aluminum alloy
    2. Overhead Transmission Line, Substation
    3. Transmission Line Hardware,Suspension Clamp
    4. High capacity to support a load
    5. Robust fastening
    6. Applicable cable diameter range: φ23-44mm
    Add to Basket
  • MRJ Twin Split Spacer Damper
    1. The clamp body is a chain alloy part,and the rest are hot-dip galvanized steel parts
    2. Protect fittings and Line Fittings
    3. For protect conductor from vibration
    Add to Basket
  • QPJ Ball Eyes
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Use pins or bolts to connect with other products
    Add to Basket
  • JY-N Type Full Tension Splice Sleeve
    1. The Inner Joint pipe is a hot-dip galvanized steel part,and the external connection is an aluminum part.
    2. Splicing Fittings, hydraulic butt joint type
    3. Line Fittings
    4. For Connecting conductor
    Add to Basket
  • P Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Ring and bowl pegboard
    5. P Clevis Eye
    Add to Basket
  • JY-BG , JYD-BG Mid Span Joint
    1. The outer tube is an aluminum part and the inner tube is a hot-dip galvanized steel part
    2. Hydraulic type
    3. Splicing Fittings and Line Fittings
    4. For connecting conductor
    Add to Basket
  • Strain Clamp And Insulation Cover
    1. High Strength Aluminum Alloy
    2. Insulated Overhead Lines
    3. Transmission Line Hardware, Insulation Fittings
    4. Easy to install, long service life
    Add to Basket
  • ZH Ball Eyes
    1. Forged steel/Casting steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Load is 70kN-300kN
    5. ZH Type Ball Eyes for Insulator Link Fittings
    Add to Basket
  • JS Double Bus-bar Spacer
    1. The clamp body is made of Aluminum alloy part,and the rest are hot-dip galvanized steel parts
    2. Protect fittings and Line Fittings
    3. For protect conductor from vibration
    Add to Basket
  • Suspension Clamp XGU-F
    1. Aluminum Alloy
    2. Overhead Transmission Line
    3. Transmission Line Hardware,Suspension Clamp
    4. Improved line safety and reliability
    5. Compact and easy to install
    Add to Basket
  • JY-G And JBD-G Splice Sleeve
    1. Hot-dip galvanized steel parts
    2. Hydraulic butt joint, stranded, burst joint
    3. Splicing Fittings and Connection Fittings
    4. For Connecting conductor
    Add to Basket
  • Suspension Clamp XGU
    1. Malleable cast iron
    2. Overhead Transmission Line,Substation
    3. Transmission Line Hardware,Suspension Clamp
    4. Minimal eddy current losses and hysteresis
    5. Simple to install and light in weight
    Add to Basket
  • QH Ball Eyes
    1. Forged steel/Casting steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Load is 70kN-300kN
    5. QH Type Ball Eyes for Insulator Link Fittings
    Add to Basket
  • ZBS Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Clevis Tongue
    Add to Basket
  • LV Yoke Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Overhead Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Yoke hardware
    5. Substation Fittings
    Add to Basket
  • LF Yoke Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Overhead Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Yoke hardware
    5. Substation Fittings
    Add to Basket
  • Suspension Clamp XGA XGB XGC
    1. Aluminum alloy
    2. High Voltage Transmission Line
    3. Transmission Line Hardware,Suspension Clamp
    4. Low failure rate
    5. Resistant to high and low temperatures, long service life
    Add to Basket
  • JY-L Type Full Tension Splice Sleeve
    1. Aluminum parts
    2. Hydraulic butt joint for aluminum stranded wire
    3. Splicing fittings and Line fittings for connecting conductor
    4. Suitable conductor is Aluminum alloy conductor ( AAC )
    Add to Basket
  • JX Repair Sleeves
    1. Aluminum parts
    2. Splicing Fittings and Line Fittings
    3. For Connecting conductor
    Add to Basket
  • Wedge Insulation Strain Clamp
    1. Aluminum Alloy
    2. Overhead Transmission Fittings
    3. Transmission Line Hardware,Insulation Fittings
    4. Can be installed directly without stripping the insulation
    Add to Basket
  • QSJ Ball Eyes
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Socket Clevis Eyes
    Add to Basket
  • JY-BG Splice Sleeve
    1. Aluminum for external joints, hot-dipped galvanized steel for internal joints
    2. Hydraulic docking
    3. Splicing Fittings and Line Fittings
    4. For connecting conductor
    Add to Basket
  • JZX4 Cross Type Spacer Damper
    1.The clamp and frame are made of aluminum alloy,the rubber part is made of synthetic rubber
    2.Protect fittings and Line Fittings
    3.For protect conductor from vibration
    Add to Basket
  • MRJ3 Three-split Spacer Damper
    1.The body is made of aluminum alloy ,and the rest are hot-dip galvanized steel parts
    2.Protect fittings and Line Fittings
    3.For protect conductor from vibration
    Add to Basket
  • JY-D Splice Sleeve
    1.The outer tube is an aluminum part and the inner tube is a hot-dip galvanized steel part
    2.Hydraulic lap joint
    3.Splicing Fittings and Line Fittings
    4.For Connecting conductor
    Add to Basket
  • JY-G Repair Sleeves
    1. Hot-dip galvanized steel parts
    2. Splicing Fittings
    3. Line Fittings
    4. For Connecting conductor
    Add to Basket
  • JYT Jumper Connector
    1.The clamp body is made of aluminum and the rest are hot-dip galvanized steel parts
    2.Splicing Fittings and Line Fittings
    3.For Connecting conductor
    Add to Basket
  • Strain Clamp NY
    1. Hot-dip galvanized steel
    2. Substation Fittings, Line Fittings,Distribution lines
    3. Transmission Line Hardware,Tension Clamp
    4. Robust resistance to corrosion
    5. Strong resilience to weather
    6. Simple installation that lowers labor expenses
    Add to Basket
  • Strain Clamp NUT
    1. Malleable Iron,Aluminum Alloy
    2. Substation Fittings, Line Fittings
    3. Transmission Line Hardware,Tension Clamp,Wedge Clamp
    4. lengthy service life and a smooth exterior
    5. Easy to install
    Add to Basket
  • Strain Clamp NX
    1. Malleable Iron, Aluminum Alloy
    2. Substation Fittings, Line Fittings
    3.Transmission Line Hardware,Tension Clamp,Wedge Clamp,Anchoring Clamp
    4. Excellent craftsmanship
    5. Numerous uses
    Add to Basket
  • Strain Clamp NY For Aluminium Clad Steel Strand
    1. Aluminum, hot-dip galvanized steel
    2. Substation Fittings, Line Fittings
    3. Transmission Line Hardware,Tension Clamp
    4. Lengthy service life and a smooth surface
    5. Simple to install
    Add to Basket
  • Strain Clamp NY For Steel Wire
    1. Hot-dip galvanized steel
    2. Substation Fittings, Line Fittings
    3. Transmission Line Hardware,Tension Clamp
    4. Numerous uses
    5. Excellent craftsmanship and an extended lifespan
    Add to Basket
  • Strain Clamp NXL
    1. High strength and oxidation resistant aluminium alloy
    2. Distribution and transmission lines
    3. Transmission Line Hardware,Tension Clamp
    4. Good weather resistance
    5. Resistance to corrosion and high electrical conductivity
    Add to Basket
  • Suspension Clamp XGF
    1. Aluminum alloy
    2. Overhead Transmission Line,Substation
    3. Transmission Line Hardware,Suspension Clamp,Heavy Duty Clamp
    4. Resistant to corrosion and rust
    5. High strength and strong grip
    Add to Basket
  • Suspension Clamp XGH
    1. Aluminum alloy
    2. Overhead Transmission Line,Distribution Lines
    3. Transmission Line Hardware,Suspension Clamp
    4. Not a single hysteresis
    5. Effect of energy conservation
    Add to Basket
  • Suspension Clamp XGT
    1. Malleable cast iron
    2. Overhead Transmission Lines,Substation Lines
    3. Transmission Line Hardware,Suspension Clamp
    4. Increased resistance to corrosion
    5. Safe and reliable
    Add to Basket
  • JBCD Series Puncture Clamp
    1. Polyamide for Case
    2. Insulated Overhead Lines
    3. Transmission Line Hardware,Insulation Fittings
    4. Piercing structure to ensure piercing pressure
    5. Easy to install
    Add to Basket
  • JBC Series Puncture Clamp
    1. Polyamide for Case
    2. Insulated Overhead Lines
    3. Transmission Line Hardware,Insulation Fittings
    4. Puncture structure
    5. With special installation tools to ensure the puncture pressure
    6. Easy to install
    Add to Basket
  • Z Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Ring and bowl pegboard
    Add to Basket
  • JY Type Full Tension Splice Sleeve
    1. The outer tube is an aluminum part and the inner tube is a hot-dip galvanized steel part
    2. Hydraulic butt
    3. Splicing Fittings and Line Fittings
    4. For connecting conductor
    Add to Basket
  • WSJ Socket Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Oval Ball Socket
    Add to Basket
  • UB Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. UB Clevis
    Add to Basket
  • UL Shackle
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Bow Shackles
    5. With safety bolt pin
    Add to Basket
  • W Socket Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Socket Clevis Tongue
    Add to Basket
  • Ring Monoblock Forging
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Iron and Steel
    Add to Basket
  • U Shackle
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Bow Shackles
    5. With safety bolt pin
    Add to Basket
  • WJ Socket Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Oval Ball Socket / socket tongue
    Add to Basket
  • QY Yoke Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Iron and Steel
    Add to Basket
  • JYB Type Splice Sleeves
    1.The outer tube is an aluminum part and the inner tube is a hot-dip galvanized steel part
    2.Explosion pressure lapping
    3.Splicing Fittings and Line Fittings
    4.For Connecting conductor
    Add to Basket
  • Q/QP Ball Eyes
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Load is 70kN-320kN
    Add to Basket
  • PD Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Ring and bowl pegboard
    Add to Basket
  • PS Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Ring and bowl pegboard
    Add to Basket
  • LXV Yoke Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Overhead Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Yoke hardware
    5. Substation Fittings
    Add to Basket
  • LX Yoke Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Overhead Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Yoke hardware
    5. Substation Fittings
    Add to Basket
  • Extension Rods
    1. Zinc-plated/Hot dip Galvanized
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Stay Rod
    5. Forged Steel
    Add to Basket
  • DB Type Adjusting Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Hinge Clevis
    Add to Basket
  • JY , JYD Full Tension Splice Sleeve
    1. The inner joint pipe is a hot-dip galvanized steel part,and the outer joint and the two end liners are aluminum parts.
    2. JY hydraulic butt ,JYD hydraulic lap
    3. Splicing Fittings and Line Fittings
    4. For Connecting conductor
    Add to Basket
  • L Yoke Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Overhead Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Yoke hardware
    5. Substation Fittings
    Add to Basket
  • U Bolts
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Iron and Steel
    Add to Basket
  • QS Ball Eyes
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Oval Ball Socket
    Add to Basket
  • Suspension Clamp XGJ
    1. Malleable cast iron
    2. Overhead Transmission Line,Distribution Lines
    3. Transmission Line Hardware,Suspension Clamp
    4. Easy and fast installation; no need for machining
    5. Effectively prevents wires from falling, hanging, swaying, etc.
    Add to Basket
  • Suspension Clamp XGF-K
    1. Malleable cast iron,Aluminum alloy
    2. Overhead Transmission Line
    3. Transmission Line Hardware,Suspension Clamp,Heavy Duty Clamp
    4. Adaptable to all weather conditions
    5. Not experiencing hysteresis
    6. Energy-conserving
    Add to Basket
  • WS Socket Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Oval Ball Socket / Clevis Tongue
    Add to Basket
  • JZF4 Four Split Spacer Damper
    1. The clamp and frame are made of aluminum alloy;the rubber part is made of synthetic rubber
    2. Protect fittings
    3. Line Fittings
    4. For protect conductor from vibration
    Add to Basket
  • Strain Clamp NLD
    1. Malleable Iron
    2. High Voltage Power Transmission, Insulation, Electrical Installation
    3. Transmission Line Hardware,Strain Clamp
    4. Easy to install, long service life
    Add to Basket
  • PT Type Adjustment Plate
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Suspension hanger
    Add to Basket
  • Suspension Clamp XG
    1. Aluminum alloy
    2. Overhead Transmission Line,Distribution lines
    3. Transmission Line Hardware,Suspension Clamp
    4. Strong corrosion resistance
    5. Numerous uses
    Add to Basket
  • ZS Clevis
    1. Hot Dip-galvanized Steel 
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Ring and bowl pegboard
    Add to Basket
  • WSY Socket Clevis
    1. Hot Dip-galvanized Steel
    2. Fixing for Transmission Line
    3. Transmission Line Hardware/Connection fittings
    4. Oval Ball Socket
    Add to Basket
  • FR Vibration Dampers
    1.The clamp is made of aluminum alloy;The hammer is gray cast iron;The rest are hot-dip galvanized steel parts.
    2.Line fittings
    3.For use on fibre optic cable and conductor
    Add to Basket

Contact Us

E-mail: sales01@henvcon.com
Telephone: 0086-18925418659
About Us

Henvcon is eager to explore the future in a way that benefits all parties concerned.

​​​​​​​  HOT Overhead Power Line Accessories

  Insulator Top Tie

  Stockbridge Vibration Damper

  Single Suspension Set for OPGW

Follow Us

Mobile: 0086-18925418659

E-mail: sales01@henvcon.com

ADD: D blog,NO.20 Technology Road,Shishuikou village Oiaotou Town,Dongguan City, Guangdong Province,China.
Copyright © 2024​​​​​​​ Henvcon All Rights Reserved