Suspension Clamp XGF-K

XGF-K Series Suspension Clamp For The Upper 500kV Lines

The overhanging wire clamp of type XGF-K is a corona-proof type that is primarily used for overhead power lines and upper resistance 500kV line fixtures. Its body is composed of high-strength aluminum alloys or malleable cast iron, among other materials, and all of its steel components have been heat-treated to provide exceptional corrosion resistance.

Feature

1. To reduce corona production, the construction is streamlined and features high roughness.

2. High holding power, low magnetic loss, light weight, and strength.

3. The fixed shaft is fastened to the upper bar connection plate by ring head bolts and is situated beneath the wire axis.

Model Specification

Images

Installation Method Of The Suspension Clamp

At the point where the suspension clamp is to be installed, measure the span of the strand and determine the clamping distance according to the height of the mast.

Wrap the strand around the clamp-fixed part of the clamp from above and below.

Attach the suspension clamp to the pole with a wrench or pliers and adjust it according to the distance from the pole required for the installation of the equipment.

The insulators are placed on the line as required to allow the power line to pass over the insulators and complete the installation of the line.

It should be noted that the specific installation of suspension clamp should also refer to the equipment manual, the installer's experience and the actual situation for adjustment.