Availability: | |
---|---|
The NXL type insulation strain clamp is appropriate for distributing wire up to 10KV, fixing the antenna insulation aluminum conductor or the bare aluminum conductor on the rotating angle or insulator of the terminal tie rod, and then fixing and tightening the antenna conductor.The insulation cover and the tension clamp are used in tandem to provide insulation protection.
1. Non-magnetic special die-cast aluminum alloy, high strength, energy-saving.
2. Wedge-locking structure, good grip, anti-loosening, maintenance-free.
3. Open design, the parts are integrated, do not fall out when loading and unloading, easy to install.
1. Industrial frequency withstand voltage should be ≥ 45kV holding voltage for 1 minute without breakdown or flashover.
2. Insulation resistance is >1.1x1014Ω.
3. Ambient temperature is -30℃-90℃.
4. After an artificial climate aging test lasting 1008 hours, climate resistance is good.
Model | Applicable wire | Overhead insulated aluminum | Nominal breaking load | Polyethylene cover |
NXL-1 | Φ 6.0-9.0 | 35-50 | 7.4 | NXL-1-2Z |
NXL-2 | Φ 9.0-12.0 | 70-95 | 14.5 | NXL-1-2Z |
NXL-3 | Φ 12.0-15.0 | 120-150 | 22.1 | NXL-3Z |
NXL-4 | Φ 15.0-19.0 | 185-240 | 36.5 | NXL-4Z |
1. If you order the product with insulating cover, please add Z after the model number, such as "NXL-3Z".
2. If you buy the insulating cover separately, please choose according to the selection table, such as "NXLZ-3".
Insulated strain Clamp (NXL), is a commonly used electrical equipment in power transmission and distribution lines. It is mainly used to fix power lines so that they can withstand tension and prevent breakage or loosening of the lines caused by external forces. The tension resistance of insulated tension clamp NxL refers to the maximum amount of tension it can withstand. High tension clamps can provide better line fixing effect, reduce loosening and swinging, and enhance the safety and stability of the line.
The NXL type insulation strain clamp is appropriate for distributing wire up to 10KV, fixing the antenna insulation aluminum conductor or the bare aluminum conductor on the rotating angle or insulator of the terminal tie rod, and then fixing and tightening the antenna conductor.The insulation cover and the tension clamp are used in tandem to provide insulation protection.
1. Non-magnetic special die-cast aluminum alloy, high strength, energy-saving.
2. Wedge-locking structure, good grip, anti-loosening, maintenance-free.
3. Open design, the parts are integrated, do not fall out when loading and unloading, easy to install.
1. Industrial frequency withstand voltage should be ≥ 45kV holding voltage for 1 minute without breakdown or flashover.
2. Insulation resistance is >1.1x1014Ω.
3. Ambient temperature is -30℃-90℃.
4. After an artificial climate aging test lasting 1008 hours, climate resistance is good.
Model | Applicable wire | Overhead insulated aluminum | Nominal breaking load | Polyethylene cover |
NXL-1 | Φ 6.0-9.0 | 35-50 | 7.4 | NXL-1-2Z |
NXL-2 | Φ 9.0-12.0 | 70-95 | 14.5 | NXL-1-2Z |
NXL-3 | Φ 12.0-15.0 | 120-150 | 22.1 | NXL-3Z |
NXL-4 | Φ 15.0-19.0 | 185-240 | 36.5 | NXL-4Z |
1. If you order the product with insulating cover, please add Z after the model number, such as "NXL-3Z".
2. If you buy the insulating cover separately, please choose according to the selection table, such as "NXLZ-3".
Insulated strain Clamp (NXL), is a commonly used electrical equipment in power transmission and distribution lines. It is mainly used to fix power lines so that they can withstand tension and prevent breakage or loosening of the lines caused by external forces. The tension resistance of insulated tension clamp NxL refers to the maximum amount of tension it can withstand. High tension clamps can provide better line fixing effect, reduce loosening and swinging, and enhance the safety and stability of the line.
Henvcon is eager to explore the future in a way that benefits all parties concerned.