Full Tension Splice Sleeve - JY、JYD
JY、JYD Full tension splice sleeve for ACSR Conductors suits all aluminum conductor steel-reinforced(ACSR) conductors. The inner sleeve is hot-dip galvanized steel whereas the connecting tube is a seamless aluminum alloy extruded tube.
Technical Specifications
1. The mechanical strength of the connection point, should not be less than 95% of the calculated pull-off force of the connected conductor.
2. Splice point of resistance, should not be greater than the resistance of the length of the conductor being connected.
3. The rated voltage of the splice point, long-term through the load current, the temperature rise shall not exceed the temperature rise of the conductor.
Advantages
1. Protecting Conductors
Full tension splice sleeve provides an additional layer of protection against physical damage to the conductor or erosion from the outside environment. It protects the conductor from damage such as impact, crushing, pulling and chemical corrosion.
2. Aesthetic Appearance
Full tension splice sleeve often have a smooth, rounded appearance that makes the entire circuit look cleaner and more aesthetically pleasing.
3. Easy To Install
Full tension splice sleeve can be easily installed, making conductors easier to conductor and maintain. They are often designed to be flexible and adaptable to different installation environments and needs.
4. Provide Electrical Isolation
Full tension splice sleeve can provide electrical isolation, preventing interference and short circuits between conductors. This improves the safety and stability of the circuit and reduces the risk of circuit failure.
5. Extends Service Life
Full tension splice sleeve can extend the service life of conductors. They protect conductors from daily use and environmental changes, reducing the likelihood of conductor deterioration and damage. This reduces repair and replacement costs
Model Specification
Model | Applicable
conductor range (mm) | Main dimensions (mm) | Grip
≥(kN) | weight (kg) |
D | φ | L | d1 | φ1 | L1 | d2 | φ2 | L2 |
JYD-50/30 | LGJ-50/30 | 32 | 20.0 | 300 | 18 | 12.0 | 100 | 19.0 | 12.5 | 85 | 40.5 | 0.58 |
JYD-70/40 | LGJ-70/40 | 32 | 21.5 | 340 | 20 | 13.8 | 105 | 20.0 | 15.0 | 100 | 55.4 | 0.58 |
JYD-95/55 | LGJ-95/55 | 34 | 26.0 | 440 | 24 | 16.0 | 130 | 25.0 | 17.0 | 130 | 94.0 | 0.86 |
JYD-120/70 | LGJ-120/70 | 44 | 33.0 | 465 | 30 | 18.0 | 145 | 32.0 | 19.5 | 135 | 94.0 | 1.69 |
JY-50/30 | LGJ-50/30 | 26 | 18.0 | 400 | 16 | 7.6 | 190 | 17.0 | 13.0 | 70 | 40.5 | 0.56 |
JY-70/40 | LGJ-70/40 | 32 | 20.0 | 420 | 18 | 8.8 | 220 | 19.0 | 14.5 | 85 | 55.4 | 0.94 |
JY-95/55 | LGJ-95/55 | 34 | 24.0 | 500 | 20 | 10.3 | 260 | 23.0 | 17.0 | 120 | 94.0 | 1.28 |
JY-120/70 | LGJ-120/70 | 36 | 25.5 | 570 | 22 | 11.5 | 290 | 24.5 | 19.5 | 120 | 94.0 | 1.81 |
Images
Q&A
Q1. What is the material of JY type Full tension splice sleeve?
A1. The inner joint pipe is a hot-dip galvanized steel part,and the outer joint and the two end liners are aluminum parts.
Q2. What is the packing method of JY type Full tension splice sleeve?
A2. Cartons or wooden boxes, depending on the customer's needs.
Q3. How to choose the right model?
A3. You can choose according to the model specification table, or provide conductor size to us, we will help you choose the right model.
