What Is A Suspension Clamp?
Suspension clamps for cable are used to hang conductors or ground wires to insulators or link fittings to tower arms and substation structures.
Why You Need a Suspension Clamp
Suspension Set for OPGW is primarily used for straight-sided drop tower, or less than 15 º line tower connection. Clamp screw from the inside and outside the two pre-twisted wire, hanging head and supporting the composition of connecting fittings. Clamp grip strength is greater than the tensile strength of fiber optic cable that rated 10% -20%. For the transfer axial loads and distributed radial compressive stress, it offers better protection of fiber optic cable, to avoid the phenomenon of bending stresses and stress concentration.
Suspension Set for OPGW with the Suspension has excellent fatigue resistance, the power cable can also play a supporting role in damping.
Here at Henvcon, Aluminum suspension clamp can be designed according to cable diameter.
1.The Heli formed Aluminum Suspension Clamp is intended for connecting OPGW Cable and pole, reducing static stress to the OPGW Cable at support points and cushioning against the dynamic stress of aeolian vibration. Providing protection against cable bending stress, there's no other stress concentration, in order that the fiber optic doesn't produce extra loss within the cable after installation.
2.The Preformed Aluminum Suspension Clamp is designed for connecting OPGW Cable and Poles(Towers). It can reduce the static stress to the OPGW Cables at support points and strengthen anti-vibration ability of ADSS cables, cushioning against the dynamic stress of Aeolian vibration. Suspension Clamps also makes sure that the cable bending won't exceed the permissible value, making the cable doesn't generate bending stress so that the fiber optic doesn't produce extra loss within the cable after installation.
Two types of Suspension Set
1.Single Suspension Set For OPGW Cable
2.Double Suspension Clamp For OPGW Cable
(1)Structural Reinforcing (2)Outer Rods (3)AGS Clamp (4)Bye Chain Link(Type ZH) (5)Anchor Shackle (6)Grounding Wire Clamp
(1)Structural Reinforcing Rods (2)Dead-end Component (3)AGS Clamp (4)PS-Link (5)YokePlate (6)U-Clevis (7)Grounding Clamps
★ Suspension Clamp
★ Material : Aluminum +EPDM Rubber
★ Single Suspension Clamp
★ Double Suspension Clamp
★ The fulcrum of suspension dispersed the stress to the preformed rods, minimizi...
Henvcon OPGW suspension clamp is mainly used for hanging and supporting optical fiber cable on straight pole and tower.
★ Double Suspension Clamp
★ Suspension Clamps are intended for connecting OPGW Cable and pole
Prolong the service life of optical cable.
Protect the ADSS fiber cable to operate safely under the condition of unbalanced load.
★ Prolong the service life of optical cable
★ Protect the ADSS fiber cable to operate safely under the condition of unbalanced load
Henvcon short span suspension clamp is designed to reduce static stress at the support point of ADSS cable.
ADSS Suspension Clamp C...
Guangdong Henvcon Power Technology Co.,Ltd.
0086 189 2541 8659
0086 135 2844 4703
Address: No 20 Technology Road Qiaotou Town Dongguan City Guangdong Province China.